Delmhorst-instrument F-2000 Instrukcja Użytkownika Pobierz pdf (Strona 9)

Test A

hAttach the #831 short pin prod to the H-4 handle and

connect the handle to the external connector on top of the

meter.

hPrepare a representative sample by collecting hay from

various parts of the windrow.

hPlace hay in a non-conductive container (such as a 5 to 10

gallon plastic pail) and apply the short pin prod to the hay.

hPress the read key

! and take a reading.

hMix the sample once again and take at least two more

readings. Use the highest readings.

Notes

hRepeat the steps above if considerable variations are found

in the meter readings. To reduce these variations, chop the

hay, mix it thoroughly and take several readings by follow-

ing the procedures above. This will make the moisture

distribution in the sample more uniform.

Test B

hAttach the #831 short pin prod to the H-4 handle and

connect the handle to the connector on top of the meter.

hApply the prod to the hay in the windrow.

hPress the read key

! and take a reading.

hMake several tests on the hay exposed to the sun, then

turn the windrow over and make an equal number of tests

on the hay that had been closer to the ground. Use the

highest readings.

Notes

hMake sure that the points of the electrode are not touching

the ground. The electrode points should make contact with

the hay only.

F-2000 owners manualB&W_F-2000 owners manual out 1/11/13 11:31 AM Page 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Brak uwag

Delmhorst-instrument F-2000 Instrukcja Użytkownika Strona 9